All orders placed during the week will be shipped during the weekends.

h87a PCB's
h87a PCB's
h87a PCB's
h87a PCB's
h87a PCB's

h87a PCB's

Regular price $66.00

ApexKeyboards is happy to announce that we will be doing a PRE-ORDER for the fully programmable PCB for the custom 87-key layout. 

Normal PCB's are 1.6mm and thin ones are 1.2mm. Both PCB's are matte black with FR4 material. 

Note: This is a pre-order and will ship when shipment arrives to us from Hiney.

ALL PRICES IN CANADIAN DOLLARS


 

To check/estimate compatibility: h87a Compatibility Chart

For the thin PCB, pay attention to how tight you make the stabilizer screws while using the spacers as they can cause the stabilizer to bind and not return properly.

I CANNOT GUARANTEE THAT THIS PCB WILL FIT YOUR CASE, even if it is listed as "probable" by the spreadsheet linked above. If you have doubts, wait until someone else with your case tries this PCB.

Specs: (Credit to Hiney for the specs list)

 

  • TKL PCB, programmable via QMK.
  • MX plate/PCB mount only. NO ALPS SUPPORT ON THIS VERSION
  • "Skinny A87" form factor - same footprint as B87, but same USB placement and stab layout as A87.
  • Standard ANSI and WKL bottom rows, ISO enter, short right and left shifts, 2u backspace
  • Top-side Mini USB port
  • Bi-directional spacebar and right shift stabilizer mounting (north or south) - You must use screw-in stabilizers on AT LEAST these two positions
  • RGB underglow
  • One-color in-switch LED
  • Powered by Atmega32U4 MCU
  • No physical reset switch - just short two pins on the PCB (for case compatibility)
  • In-switch indicator lights - connected via jumpers
  • Pins to solder a daughter board on (Moon TKL, for example)
  • JST SH 4-pin connectors for USB daughterboards and RGB breakout
  • Fully soldered and pre-programmed with a basic TKL map out of the box
  • SPI pins
  • Breakaway USB port for cases that use USB daughterboards
  • Breakaway switch stabilizer supports along bottom of PCB (for cases w/ limited clearance)


Github link for QMK:

https://github.com/hineybush/qmk_firmware/tree/master/keyboards/hineybush/h87a